Precautions For Carbon Fiber Production

As a fiber material,It is very slender and easy to be stretched, so a lot of dust will be generated during production and machining. These dusts will not only endanger people’s health, but also cause electrical short-circuits and cause serious consequences. For these problems, people have summarized Here are some ways to deal with it.

To prevent the generation of dust:

When carbon fiber is processed, some dust is generated that floats in the air. In order to prevent dust hazards, you can use electric vacuum cleaners to keep the air clean.

To prevent harm to the human body:

Fiber can cause allergic reactions. When carbon fiber filaments come into contact with human skin, people with allergies may feel pain or itching. Do not rub hard at this time. If the fiber penetrates deep into the skin, it will cause inflammation. The best treatment is to wash with warm soapy water or tape off the carbon fiber filaments. Special attention should be paid to the protection of the eyes and throat. Those engaged in related work should wear goggles and masks. Once the dust enters the lungs, it cannot be discharged.

To prevent electrical short circuit:

Carbon fiber is a conductor, so when airborne fibers seep into a switch or control device, a short circuit can occur. It is recommended to keep the interior clean and tidy, and collect all the carbon fiber products produced in a box, so that it cannot come into contact with electrical equipment.
The above are some common problems and solutions for carbon fiber production. Carbon fiber is not a toxic material, and those who use it should not be afraid. As long as they face it correctly and take protective measures, it will not cause harm to the human body.


Copyright notice:

This article comes from China Be-cu Prototype Material Technology Co., Ltd.
If you need to reprint and quote, you must keep the link and indicate the source, otherwise, you will be investigated.


Precautions For Carbon Fiber Production

ISO 9001 certified. BE-CU Prototype Offering CNC machining carbon fiber and other manufacturing services for carbon fiber marterial. Various capabilities include notching, labeling, drilling carbon fiber, grinding, laser cutting carbon fiber, finishing, plating, marking, CNC milling carbon fiber and turning carbon fiber.We stock high quality 3k carbon fiber sheet in a variety of thickness, types and finish. Its a great material used in applications where light weight and strength are needed such as drones. Unlike other workshops, we have no min order and are often filling orders with a single part. We also don’t make you pay for the full sheet and you only get charged for what is used. With a large selection of material, you should find everything you need to make your project come to life. We are also able to handle larger production runs and provide a competitive pricing. If we don’t have the material or finish you require, we are more the willing to look at bringing it in for you.

What Is Carbon Fiber?Carbon fiber is made of polyacrylonitrile (PAN) (or pitch, viscose) and other organic fibers by carbonization (removal of most elements except carbon) by pyrolysis method under inert gas at high temperature above 1,000 °C. Inorganic polymer fibers with a carbon content of more than 90%.

Be-cu Recommends Stamping – How To Improve The Wear Resistance Of The Die Surface And… The Form Of CNC Machine Tool Manipulator